Precautions in slitting aluminium strip extensively utilized in manufacturing industries inclusive of radiators, cables, transformers and so forth. The aluminum strip is acquired by using slitting aluminum coil of given materials and thicknesses. As an instance, aluminium strip 1mm is processed by using cutting 1mm thick aluminum coil into strips of the preferred width. The precautions for the strips for the duration of slitting are as follows.
The modern aluminum strip slitting device can hold the width tolerance among 0.05mm and zero.1mm, so the slitting unit ought to be set by way of the operator, and the manufacturing can be started out after the calibration, and the trouble of big dimensional deviation ought to now not arise. The burr phenomenon at the threshold of the aluminium strip is in particular resulting from the slicing device. If the edge burr is located to be critical, stop production at once and discover the cause.
The aluminum coil is generally laid flat whilst it's miles cut, or it can be positioned vertically. The aluminum strip have to be tightly wound on a metallic or aluminum or equivalent die while slitting. The internal diameter of the die is required to be one hundred+2 mm, a hundred and fifty-2 mm, 204+2 mm, 406. +three mm. The length of the die of the slitting aluminium strip have to be the same as the width of the aluminum-plastic composite strip, and the stop of the strip sticking out composite strip ought to be less than 1 mm, and the duration of the unsplit aluminum-plastic composite strip ought to be five-10 mm beyond the aspect of the composite strip. In keeping with the deliver and call for settlement, the aluminum strip can also be wound on other sizes of dies.
Those are precautions in slitting aluminium strips. Wish it’s useful. We supply aluminium strip/coil for transformer and different end merchandise. Welcome to contact us!